| The Home of Green Energy Products in the UK |
|---|
High Specification Solar Hot Water System - Kit 3 (2 Panels)
The high-spec solar installation kit 1 comprises of the following:
- TWO x 20 tube 47mm vacuum tube solar panel - manifold type (SFB20-47). (See details below).
- Roof mounting kit. (See details below).
- Twin coil hot water cylinder. (See options below)
- TDC3 controller with digital temperature display. (See details below).
- 5 litres antifreeze. This is neat propylene glycol with additive package. The recommended dilution is 40% (providing total volume of 12 litres).
- Circulation pump and isolation valves. (See details below).
- Anti-syphon valve. (See details below)
- Pressurised system Kit - (including filling loop, isolation valves and double check valve, pressure gauge and pressure relief valve). (See details below).
- 10m of 10mm diameter Armaflex - high temperature insulation. (See options below)
- Solar Filling Kit. This is used for filling pressurised solar systems with antifreeze/water mixture and holds up to 8litres. It is a low cost filling system that works quickly, efficiently and by hand. The kit includes compression fitting/expansion vessel attachment and instructions.
There are a few other items that you will usually need to complete the installation - pipe clips, pipe fittings and reducers, solder etc). Some soldering is normally required, although the use of 10mm copper minimises the number of joints and therefore the amount of soldering involved. In fact, it is possible to avoid soldering altogether if compression joints are used throughout.
Hot Water Cylinder Options: Armaflex Options:
| Size | Extra Cost |
|---|---|
| 1050x400 - 123 litre | £0 |
| 1200x400 - 138 litre | £0 |
| 1300x400 - 150 litre | £0 |
| 1400x400 - 163 litre | £0 |
| 1500x400 - 172 litre | £0 |
| 1800x400 - 210 litre | £85.00 |
| 1050x450 - 144 litre | £0 |
| 1200x450 - 168 litre | £0 |
| 1300x450 - 184 litre | £45.00 |
| 1400x450 - 200 litre | £80.00 |
| 1500x450 - 216 litre | £90.00 |
| 1800x450 - 259 litre | £150.00 |
| Internal Insulation Diameter | Extra Cost |
|---|---|
| 10mm internal insulation diameter (plus 10m copper pipe) |
£55.00 |
| 15mm internal insulation diameter | £0 |
| 22mm internal insulation diameter | £20.00 | Pipe Insulation Thickness | Extra Cost |
| 13mm thick pipe insulation | £0 |
| 19mm thick pipe insulation (not available with 10mm pipe) |
£30.00 |
The 20 tube solar panel is a high efficiency 47mm double wall evacuated tube solar collector, this part of the kit includes:
- 20 bottom rail mounted tube cups.
- 1 tube of heat conducting paste.
- 2 side rails.
- 1 bottom rail.
- 1 set of nuts, bolts and washers for assembly.
Below is a list of the various parameters and specifications of the 47mm double wall evacuated tube solar collector:
| Parameter | Details |
|---|---|
| Panel Dimensions | 166x150x13cm |
| Weight | 49kg |
| Panel Area | 2.25m² |
| Aperture Area | 1.747m² |
| Tube Length | 1.5m |
| Width of Absorber | 37mm |
| Casing Material | Stainless Steel |
| Filling Volume | 1.1ltr |
| Width of Entry/Exit Pipe | 22mm |
| Thickness of Collector Insulating Material |
60mm |
| Heat Transfer Medium | Water Mixed with 40% Glycol Antifreeze |
The SFB panel is the best choice for the UK. The panel is considered to be one of the most cost-effective on the market, and performs extremely well in the UK climate. Its slimline design suits UK architecture, and in most cases, it should be considered 'permitted development' - meaning that you do not need to apply for planning permission if you wish to fit these panels to your roof. The SFB panel has a very low heat capacity, containing only 1 - 1.5litres of water inside the manifold. This allows the panel to heat up quickly when the sun starts to shine, and minimises heat losses at night. It is also much lighter than the integrated tank designs, making it much more suitable for load-bearing roof timbers. It should provide you with free hot water for at least 6 months of the year and will strongly contribute thereafter.
It has the following attributes:
- Suitable for pressurised systems.
- High efficiency solar collector using heat pipe evacuated tubes.
- Can be used in all climates.
- Reliable and efficient with twin-wall glass solar tubes.
- Copper heat pipes for rapid heat transfer.
- Easy plug-in installation for mounting on the roof or at ground level.
- Maintenance free.
- Suitable for high pressure water (up to 8bar / 116psi).
- Corrosion resistant silver brazed copper header.
- Frame material: 304 2B grade stainless steel.
- Casing material: 304 BA or AB stainless steel.
- Excellent insulator in glass wool.
- Collectors may be connected in series to increase water heating capacity.
- Tubes easily replaced if broken and it can still be used with broken tubes.
- Ideal for commercial solar water heating applications.
- Expected Lifetime >25years.
- 'Passive Solar Tracking' - maintains heat output regardless of sun's position in the sky.
- BSEN 12975 Approved.
The pitched roof mounting kit is suitable for 10 and 20 tube solar panels. The kit comprises of:
- 4 x 750mm stainless steel flexible straps.
- 4 x nuts, bolts and washers.
The four stainless steel roof mounting straps are designed to slide under the roof tiles and screw into the roof joists. One strap attaches to each corner of the frame. These are also suitable for slate roofs.
The TDC3 controller is currently our most popular controller:
It is a high-end controller which allows great flexibility in setup and control of solar systems - it can be used for a single solar panel system with or without variable pump speed control, swimming pools, with heat dumps or switching conventional heating systems, it can be used with two pump East/West twin solar panel systems. In fact, it is equivalent to the Resol BS3, BS4 and BSPro models (although of course, features do vary between the manufacturers). The TDC3 Controller has a high definition screen allowing moving graphics, and all three temperature readings to be displayed simultaneously. It is able to address three temperature sensor inputs and has two relay outputs, including one 'electronic' relay which can provide variable speed control for pumps. There are 15 plumbing schematics, which include twin pump systems, heat dumps, systems for preheating long pipe runs, and generic delta-T control for non-solar applications. Heat Gain is a standard feature, and is estimated from the data inputs and a correction factor (installers usually set this to 0%, although -10% is probably a realistic figure for most installations). The display indicates the total heat gain to date (kWh) and also, when the pump is running, it will display the rate of heat gain (W).
The circulation pump plus isolation valves is a 3-speed circulation pump (approx 40w, 60w, 80w)and a pair of brass ball-valve isolation valves. It is mains powered for solar circuits. The measurements and weight of the pump are:
H - 130mm
H1 - 105mm
L - 130mm
G - 1 - 1.5"
B - 130mm
Net Weight - 2.7kg
The anti syphon valve (15mm)is a one way valve which should be fitted to the return line between the cylinder and the panel, on the cooler side, orientated to prevent convection occurring at night, which would subsequently lose heat from the system.
The Pressurised system kit details are as follows:
- Size: 315 x 270mm
- Connection: 0.75"
- Filling loop (including double check valve, flexible hose and shut-off valve).
- Pressure gauge 3 bar pressure relief valve.
- 12 litre expansion vessel including mounting bracket.
The Armaflex high temperature insulation details are as follows:
- High temperature insulation for solar use.
- Suitable for up to 175°c constant temperature or up to 230°c for short periods.
- Remains flexible at high temperatures of up to + 150°C and low temperatures down to - 200°C.
- UV-resistant and can be installed outside without additional protective measures.
- Class 1 resistance to flame spread in accordance with BS 476 Part 7 test procedure.
- Built-in vapour barrier prevents condensation.
- Improved resistance against oil.
- Reduced smoke development in the event of fire.
- Lightweight and flexible: quick and easy installation with low maintenance requirements resulting in time and cost savings.
- Dust, fibre and CFC free with an ODP zero.
The specifications are:
| Specification | Details |
|---|---|
| Thermal Conductivity at 40°C | 0.045W/(m.K.) |
| Water Vapour Permeability | Moisture resistance Factor µ > 2,500. |
| Water Absorption | 0.2% by volume. |
| Surface Spread of Flames | Class 1 |
| Reaction to fire | Self-extinguishing, does not drip |
| Noise Reduction | Sound Absorption Coefficient ISO 354:2003 up to 0.8. |
| Resistance to Building Materials | Very Good |
| Resistance to Ozone | Very Good |
| Resistance to UV | Very Good |
| Environmental Aspects | ODP zero, GWP zero |
| Health Aspects | Dust & Fibre Free |
| Thermal Conductivity at 0 °C | 0.040 W/(m . K) |
Basic Price: £1700.00 excluding delivery
To order please e-mail.