Budget Kit - 1x20tube 47mm panel
£855.00 plus del
Budget Solar Installation Kit
20tube 47mm vacuum tube solar panel - manifold type (SFB20-47); roof mounting kit;
retro-fit coil - to replace existing 2.25" top-mount immersion heater
Budget Controller with digital temp display;
5litres antifreeze;
Circulation Pump + isolation valves;
pressure vessel
filling loop including isolation valves and double check valve
pressure gauge
pressure relief valve
10m of 10mm diameter armaflex HT insulation
10m of 10mm copper pipe
Solar Filling Pump

There are a few other items that you will usually need to complete the installation - pipeclips, pipefittings and reducers, and 2-port solenoid valve, solder etc).

Some soldering is normally required, although the use of 10mm copper minimises the number of joints and therefore the amount of soldering involved. In fact, it is possible to avoid soldering altogether if compression joints are used throughout.

Shipping Weight: 150kgs