| The Home of Green Energy Products in the UK |
|---|
500W (24V) Wind Turbine
The 500W wind turbine is supplied as a complete kit. To install this unit you will also need a set of deep cycle batteries, an inverter and a diversion load controller (we can provide all or any as required - see Other Products.You will also need cement for the foundations.
The following items make up the 500W Wind Turbine kit:
Kit 1:
- 3 section tower, labelled upper, middle and lower, each 2m long.
Kit 2:
- Footing for the tower, including pivot bolt.
- 3 catenary wire pieces for stays.
- 6 U bolts to secure catenary wires.
- 2 round spikes for securing footing.
- 3 angled pegs to secure catenary wire to ground.
- 3 turnbuckles with hook and eye ends.
Kit 3:
- Rectifier/regulator unit.
- Wind turbine body including cabling and bolt for tail.
- Blade hub with 6 bolts and restraining pieces.
- Fin.
- A nose cone.
Kit 4:
- Set of 3 blades.
**Specifications and packaging subject to change without notice. Sometimes kit may be packed in fewer or greater numbers of boxes.**
PLEASE BE AWARE TURBINES MUST NOT BE ALLOWED TO ROTATE WITHOUT SUFFICIENT LOAD BEING APPLIED
Below is a diagram of how to wire up the 500W (24V) Wind Turbine:
Below is a list of the various parameters and specifications of the 500W 24V model Wind Turbine:
| Parameter | Details |
|---|---|
| Rated Power | 500W |
| Max Power | 700W |
| Output DC Voltage | 24V |
| Start Wind Speed | 3m/s |
| Rated Wind Speed | 8m/s |
| Max Wind Speed | 40m/s |
| Cut-Out Wind Speed | None |
| Blade Pitch Control | None - Fixed Pitch |
| Overspeed Protection | Auto Furl |
| Gearbox | None - Direct Drive |
| Temperature Range | -40°C to + 60°C |
| Rotor Diameter | 2.70m |
| Rotor Speed | 400rpm |
| Blades | 3 |
| Blade Material | Reinforced Fiber Glass |
| Tower Height | 6.0m |
| Generator | 3 Phase Permanent Magnet Alternator |
| Weight | 131kg |
| Packing For Shipping | 72x49x38cm - 50kgs 202x20x18.5cm - 35kgs 160x24x21cm - 17kgs 68x37.5x18.5cm - 29kgs |
Price: £575.00 excluding delivery
To order please e-mail.