| The Home of Green Energy Products in the UK |
|---|
45A Diversion Load Controller
**Please note: Picture shows controller without the optional LCD display screen.**
**See picture of 60A controller for with.**
**See picture of 60A controller for with.**
Morningstar TriStar TS-45, PWM Charge Controller
Rated solar/wind, load or diversion current: 45 Amps
System Voltage: 12/24/48 VDC
Rated solar/wind, load or diversion current: 45 Amps
System Voltage: 12/24/48 VDC
This controller may be used for solar, wind or hydroelectric sources. It is UL listed and is designed for both solar/wind home systems and professional applications.
The diversion load controller is a three-function controller that provides reliable solar/wind battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. It is also available with an optional LCD display.
Key Features and Benefits:
- High Reliability - Large heat sink and conservative design enables operating at full ratings to 45°C. No need to de-rate.
- More Power - Ratings to 45A at 48VDC will handle solar/wind arrays up to 2.5kW.
- Communications Capability - RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control.
- Fully Adjustable - DIP switch provides user with a choice of 7 different digital presets and custom settings via RS-232.
- Extensive Electronic Protections - Fully protected against reverse polarity, short circuit, over-current, high temperature and overvoltage.
- Programmable Lighting Control.
- Simple Mechanical Interface - Larger power terminals and conduit knockouts. Extra space for wire turns. Fits on power panels.
- Better Battery Charging - Connecting battery sense wires will improve control accuracy. Constant voltage series PWM algorithm increases battery capacity and life.
- More Information - 3 LEDs to indicate status, faults and alarms. Optional meter displays extensive system and controller information, automatic self-test and reset capabilities. Meter connection via RJ-11 phone jack.
- Easy to Reset - Pushbutton provides manual reset and stop/start battery equalization or load disconnect.
- Low Telecom Noise - DIP switch setting will change PWM to "On-Off" battery charging.
Environmental and Mechanical Specifications:
| Specification | Details |
|---|---|
| Operating Ambient Temperature - Controller - Meter |
-40°C to +45°C -40°C to +60°C |
| Storage Temperature | -55°to +85°C |
| Humidity | 100% (non-condensing) |
| Dimensions | 260x127x71mm |
| Weight | 1.6 kg |
| Largest Wire | 35mm2/2 AWG |
| Enclosure | Type 1, indoor rated |
The diagram below shows the different uses for this charge controller:
Price: £165.00 excluding delivery
To order please e-mail.