200W (24V) Wind Turbine

The 200W wind turbine is supplied as a complete kit. To install this unit you will also need a set of deep cycle batteries, an inverter and a diversion load controller (we can provide all or any as required - see Other Products.You will also need cement for the foundations.

The following items make up the 200W Wind Turbine kit:

Kit 1:

Kit 2:

**Specifications and packaging subject to change without notice. Sometimes kit may be packed in fewer or greater numbers of boxes.**

PLEASE BE AWARE TURBINES MUST NOT BE ALLOWED TO ROTATE WITHOUT SUFFICIENT LOAD BEING APPLIED

Below is a diagram of how to wire up the 200W (24V) Wind Turbine:

Below is a list of the various parameters and specifications of the 200W 24V model Wind Turbine:


Parameter Details
Rated Power 200W
Max Power 300W
Output DC Voltage 24V
Start Wind Speed 3m/s
Rated Wind Speed 6m/s
Max Wind Speed 40m/s
Cut-Out Wind Speed None
Blade Pitch Control None - Fixed Pitch
Overspeed Protection Auto Furl
Gearbox None - Direct Drive
Temperature Range -40°C to + 60°C
Rotor Diameter 2.20m
Rotor Speed 450rpm
Blades 3
Blade Material Reinforced Fiber Glass
Tower Height 4.5m
Generator 3 Phase Permanent Magnet Alternator
Sine Inverter Power Output AC 220V, 50Hz
Weight 78kg
Packing For Shipping 75x57x30cm - 55kgs
227x6x10cm - 23kgs

Price: £399.00 excluding delivery

To order please e-mail.

Back to Products Page